A FANUC® Servo Drive and Spindle Board Repair Service in Bensenville, Illinois

FANUC AC Axis Unit Alarms for A06B-6050 Series

Alarms and Error Codes

FANUC AC Serial Spindle A06B-6062, A06B-6063, A06B-6064 Alarms and Error Codes

FANUC Alpha Servo Amplifier Module Alarm and Error Codes

FANUC Alpha Power Supply Errors and Alarm Codes

FANUC Alpha I Spindle Amplifier Alarms and Error Codes

FANUC Beta Servo Amplifier Unit Alarms and Error Codes

FANUC Beta Servo A06B-6093-H15x / H17x series I/O Alarms and Error Codes

FANUC Beta I Servo Unit Alarms and Error Codes

FANUC Beta I A06B-6132 Series Servo Unit Alarms and Error Codes

FANUC Beta I Servo Power Module A06B-6134 and A06B-6164 Error Codes

FANUC DC Axis Unit Alarms for A06B-6047 Series

FANUC AC Axis Unit Alarms for A06B-6050 Series

FANUC Alpha Spindle Amplifier Module Alarm and Error Codes

FANUC AC Spindle S Series A06B-6059 Alarms and Error Codes

FANUC AC Spindle I Series A06B-6060 Alarms and Error Codes

FANUC AC Spindle Amplifier Alarms for A06B-6044, A06B-6052, A06B-6055 Series

FANUC AC Servo Amplifier Alarms for C Series A06B-6066

FANUC AC Axis Unit Alarms for A06B-6050 Series

The following alarm codes are for FANUC AC Axis Unit Alarms for A06B-6050 Series. Knowing your alarm code could help us provide you with the fast and precise evaluation for repair or exchange services.

Type	Indications
Overload.	Contacts signal comes out at connector CN1.
Velocity feedback disconnection detection.	Light-emitting diode (LED) TG lights.
No use breaker.	On button of NFB is protruded.
High voltage alarm.	LED HV lights.
Low voltage alarm.	LED LV lights.
Circuit Fault detection.	LED HC lights. LED DC lights.
Overcurrent alarm.	LEC OVC lights.

Request a Free Consultation

Please contact us for free consultation about any of the following error codes, or any other problems with your FANUC A06B-6047 Series unit. Call 630-616-0039 or fill up a contact form.